Drain Cleaning in
Northern, Utah
Get a Quoute MIKE BACHMAN PLUMBING
LICENSED • LOCAL • SINCE 1915

Garbage Disposal Repair & Installation in Ogden, Utah

Most Disposal Problems Fixed in a Single Visit

A garbage disposal that won’t run, hums without grinding, or is leaking under your sink is an annoyance that tends to back up the whole kitchen workflow. The good news is that most disposal problems aren’t complicated. A jammed impeller, a tripped reset button, a worn seal, or a failed motor are all things we diagnose and address quickly — typically in one visit. Mike Bachman Plumbing handles disposal repairs and full replacements throughout Weber County, Davis County, Cache County, and Box Elder County.

When a disposal can’t be saved, we install a replacement that fits your usage and your budget. We carry units from the industry’s most reliable manufacturers and handle the full installation including the drain connection and electrical hookup so everything is done safely and to code.

Disposal Jam Clearing

A humming disposal that won’t spin has a jammed impeller — usually from something hard that got in (bones, fruit pits, broken glass).

Disposal Leak Repair

Leaks from a disposal can originate from the sink flange (top), the drain connection (side), or the dishwasher connection.

Disposal Won't Turn On

If the disposal is completely unresponsive, the first thing we check is the reset button on the bottom of the unit — thermal overload trips it when the motor gets too hot.

Grinding Noise Repair

Unusual grinding or rattling noises usually mean something is caught in the grinding chamber that doesn’t belong there.

Why Choose Mike Bachman Plumbing

Disposal issues don’t require a week-long wait. We schedule promptly and carry common replacement units on the truck so most jobs are wrapped up in a single visit.

Lochinvar

is an American manufacturer of high-efficiency water heaters, boilers, and pool heating products.

Rheem

is a global manufacturer of reliable, energy-efficient heating, cooling, and water heating products.
EXPERT PLUMBING SERVICES

Honest Diagnosis and Professional Service

A disposal that’s jammed or has a minor leak is often worth repairing. One with a burned-out motor that’s also 12 years old probably isn’t. We give you a straight answer.

Should I repair my disposal or replace it?

A jam or minor leak on a disposal that’s less than eight years old is almost always worth repairing — the fix is usually inexpensive and extends the unit’s life significantly. If the motor has burned out, the unit is leaking from the main body, or it’s ten years old and starting to show problems, replacement is usually the better investment. We’ll give you an honest breakdown when we assess it.

What shouldn't I put in my garbage disposal?

The things that cause the most problems: fibrous vegetables like celery and artichokes (they wrap around the impellers), expandable foods like pasta and rice (they swell with water and jam the drain), grease and fat (they solidify in the drain line), and hard items like fruit pits, bones, and shellfish shells. Coffee grounds are fine in small amounts but accumulate in drains over time. Basically — if it isn’t soft food scraps, it’s safer in the trash.

How long does a garbage disposal last?

A quality disposal properly maintained typically lasts 10 to 15 years. Units that see heavy use, or that are fed things they shouldn’t handle, may not make it that long. If yours is approaching 10 years and starting to act up, it’s usually more cost-effective to replace it than to continue repairing.

Can I install a garbage disposal myself?

Technically, yes — disposal installation is something a capable DIYer can tackle. The risks are the drain connection (improper sealing leads to slow leaks that damage cabinets and subfloors over time) and the electrical connection (needs to be properly grounded and in some cases requires a dedicated circuit). If you’re not confident with both plumbing and basic electrical work, having a plumber handle it avoids those risks.

Is there a difference between InSinkErator and Waste King?

Both are well-regarded brands. InSinkErator uses a batch-feed or continuous-feed AC motor and has been the market standard for decades — excellent build quality and widely available replacement parts. Waste King uses a permanent magnet motor that spins faster (2700 RPM vs. InSinkErator’s typical 1725 RPM) and tends to be lighter and quieter. For most households either brand performs well. We carry both and can walk you through the options at different horsepower and price points.

Let’s talk about your project

Disposal giving you trouble? Call Mike Bachman Plumbing at (801) 627-5953. We’re available 24/7 and can usually get it repaired or replaced the same day.